FMD1210-21
Networked Ambient Dust Sensor
The Networked Ambient Dust Sensor from Fidar Electronics continuously measures airborne particulate at 1, 2.5 and 10 micron sizes. It runs standalone on its own IP address with a built-in web page.
Resolves 1, 2.5 and 10 micron particle sizes
Alarm when concentration crosses a threshold
For air-quality monitoring and filter control
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Alerts by email, internal relay and external siren
A dust sensor continuously measures airborne particulate at 1, 2.5 and 10 micron sizes (PM1, PM2.5 and PM10). The size split matters: coarse particles are a filter and equipment-fouling problem, while fine particles reach deep into the lungs and are the metric occupational health actually cares about. A continuous record is both your environmental and safety compliance evidence and the basis for changing filters when they are dirty rather than when the calendar says so.
Key features
Resolves 1, 2.5 and 10 micron particle sizes
Alarm when concentration crosses a threshold
For air-quality monitoring and filter control
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Alerts by email, internal relay and external siren
Connectivity
Own IP, built-in web page, HTTP/HTTPS
PoE or 48 V adapter over a single network cable
SNMP output for PRTG, Zabbix and SolarWinds
Where it is used
Workplace air quality and exposure-limit compliance
Mines, cement plants and processing industries
Particulate control in clean rooms and sensitive production
Server-room and data-centre air quality
Environmental monitoring and emission stations
Condition-based filter changes on ventilation systems
Installation
Mount at breathing height where the air is representative, clear of any fan or air-handler discharge.
| Dimensions | Height 3 cm, Depth 12 cm, Width 10.5 cm |
|---|---|
| Weight | 0.3 kg |
| Operating temperature | -10 to 45 °C |
| Storage temperature | -20 to 60 °C |
| Operating humidity | 0 to 60%, non-condensing |
| Warranty | 2 years |
| Mount | 2 Wall-mount holes |
| Type of Input | The air |
| Recognizable Particle Size | 1, 2.5, 10 microns dust |
| Output | Network |
A dust sensor continuously measures airborne particulate at 1, 2.5 and 10 micron sizes (PM1, PM2.5 and PM10). The size split matters: coarse particles are a filter and equipment-fouling problem, while fine particles reach deep into the lungs and are the metric occupational health actually cares about. A continuous record is both your environmental and safety compliance evidence and the basis for changing filters when they are dirty rather than when the calendar says so. This is an EtherSense model and runs standalone: it takes its own IP address, serves its own web page in a browser, and needs no data logger or middleware to commission. A PoE switch or a 48 V adapter powers it, so one network cable carries both data and power. For professional monitoring its SNMP output drops straight into PRTG, Zabbix or SolarWinds. Typical applications: • Workplace air quality and exposure-limit compliance • Mines, cement plants and processing industries • Particulate control in clean rooms and sensitive production • Server-room and data-centre air quality • Environmental monitoring and emission stations • Condition-based filter changes on ventilation systems
FMD1210-21-Usermanual-EN
v1.0 · EN · 1250 KB




