FMP0180-21
Networked Ambient Pressure Sensor
The Networked Ambient Pressure Sensor from Fidar Electronics measures absolute ambient air pressure from 300 to 1100 hPa. It runs standalone on its own IP address with a built-in web page.
300–1100 hPa measuring range
For weather data, altitude and site conditions
Stable readings for long-term pressure trending
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Alerts by email, internal relay and external siren
A barometric pressure sensor measures absolute atmospheric pressure across 300–1100 hPa. Its trend is the basis of short-term weather forecasting — a fast drop means an approaching front — and alongside temperature and humidity it completes the picture of a site's conditions. The same value is used to estimate altitude and to correct a reference pressure in process calculations. Note that it measures absolute air pressure, not fluid pressure inside a pipe nor the differential between two spaces.
Key features
300–1100 hPa measuring range
For weather data, altitude and site conditions
Stable readings for long-term pressure trending
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Alerts by email, internal relay and external siren
Connectivity
Own IP, built-in web page, HTTP/HTTPS
PoE or 48 V adapter over a single network cable
SNMP output for PRTG, Zabbix and SolarWinds
Where it is used
Weather stations and site atmospheric monitoring
Altitude estimation and high-elevation sites
Reference barometric pressure for process calculations
Storage conditions for pharmaceuticals and sensitive goods
Agricultural and greenhouse applications driven by weather data
Estimating the offset between two spaces with a sensor in each
Installation
Install it in freely ventilated space; do not block its port or put it in the direct blast of a fan.
| Dimensions | Height 3 cm, Depth 14 cm, Width 10.5 cm |
|---|---|
| Weight | 0.5 kg |
| Operating temperature | -10 to 80 °C |
| Storage temperature | -20 to 80 °C |
| Operating humidity | 0 to 60%, non-condensing |
| Warranty | 2 years |
| Mount | 2 Wall-mount holes |
| Input | 300 to 1100 hPa ambient pressure |
| Output | Network |
A barometric pressure sensor measures absolute atmospheric pressure across 300–1100 hPa. Its trend is the basis of short-term weather forecasting — a fast drop means an approaching front — and alongside temperature and humidity it completes the picture of a site's conditions. The same value is used to estimate altitude and to correct a reference pressure in process calculations. Note that it measures absolute air pressure, not fluid pressure inside a pipe nor the differential between two spaces. This is an EtherSense model and runs standalone: it takes its own IP address, serves its own web page in a browser, and needs no data logger or middleware to commission. A PoE switch or a 48 V adapter powers it, so one network cable carries both data and power. For professional monitoring its SNMP output drops straight into PRTG, Zabbix or SolarWinds. Typical applications: • Weather stations and site atmospheric monitoring • Altitude estimation and high-elevation sites • Reference barometric pressure for process calculations • Storage conditions for pharmaceuticals and sensitive goods • Agricultural and greenhouse applications driven by weather data • Estimating the offset between two spaces with a sensor in each
FMP1080-21-Usermanual-EN
v1.0 · EN · 1225 KB




