FTD3070-22
3-Channel Networked Spot Temperature Sensor
The 3-Channel Networked Spot Temperature Sensor from Fidar Electronics measures one specific point with a fast 10 kΩ NTC element. It runs standalone on its own IP address with a built-in web page.
10 kΩ NTC element, −50 to 250 °C
Three independent input channels in one unit
Fast response at the measuring point
Simple mounting on pipe, machine body or panel
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
A spot temperature sensor with a 10 kΩ NTC element reads one specific point quickly and cheaply. Where the goal is watching a machine or a critical spot — rather than certified reference measurement — this is the economical choice. It fits easily on a pipe, a motor body or inside a cabinet, which means you can afford several points instead of one; in thermal monitoring, coverage usually matters more than single-point accuracy.
Key features
10 kΩ NTC element, −50 to 250 °C
Three independent input channels in one unit
Fast response at the measuring point
Simple mounting on pipe, machine body or panel
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Connectivity
Own IP, built-in web page, HTTP/HTTPS
PoE or 48 V adapter over a single network cable
SNMP output for PRTG, Zabbix and SolarWinds
Where it is used
Server room, rack and network-equipment temperature
Cold stores, industrial refrigerators and warehouses
Motor, pump and rotating-equipment body temperature
Flow and return pipe temperature in a plant room
Greenhouse and livestock-house temperature
Inside electrical panels and equipment enclosures
Installation
Put the probe in direct contact with the target surface or air; an air gap or direct sunlight pulls the reading away from the real value.
