FTA3070-21
Networked Temperature and Humidity Sensor
The Networked Temperature and Humidity Sensor from Fidar Electronics reads ambient temperature and relative humidity from one point, each with its own alarm threshold. It runs standalone on its own IP address with a built-in web page.
Reads temperature and relative humidity together
−40 to 125 °C and 0–100 % RH measuring range
Independent alarm thresholds for each value
Built for continuous environmental monitoring
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Temperature and humidity only make sense together. In a server room dry air invites electrostatic discharge while damp air brings corrosion and condensation on boards; in storage the pair decides shelf life, and in a greenhouse it decides growth. This sensor reads both from a single point, so the two values are simultaneous and comparable, and each can carry its own threshold.
Key features
Reads temperature and relative humidity together
−40 to 125 °C and 0–100 % RH measuring range
Independent alarm thresholds for each value
Built for continuous environmental monitoring
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Connectivity
Own IP, built-in web page, HTTP/HTTPS
PoE or 48 V adapter over a single network cable
SNMP output for PRTG, Zabbix and SolarWinds
Where it is used
Server room and data-centre environmental monitoring
Warehouse, cold-store and pharmaceutical storage
Greenhouses and mushroom or plant growing rooms
Livestock and poultry house climate control
Clean rooms, laboratories and operating theatres
Archive, records and museum conservation
Installation
Mount it in free-moving air, away from heat sources, sunlight and the direct discharge of an air handler.
