FDW0050-21
Networked Water Leak Sensor
The Networked Water Leak Sensor from Fidar Electronics detects water anywhere along a sensing cable of up to 50 m. It runs standalone on its own IP address with a built-in web page.
Continuous sensing cable up to 50 m
Detects a leak anywhere along the cable
Immediate alarm to protect sensitive equipment
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Alerts by email, internal relay and external siren
A water leak sensor works with a continuous sensing cable: contact with water anywhere along its length raises the alarm at once. Unlike a spot probe, which only sees where it happens to sit, the cable covers up to 50 m and can be run around racks, under a raised floor, alongside chiller pipework or around a UPS room. In a server room the difference between minutes of warning and losing the whole room is exactly where and when the water is seen.
Key features
Continuous sensing cable up to 50 m
Detects a leak anywhere along the cable
Immediate alarm to protect sensitive equipment
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Alerts by email, internal relay and external siren
Connectivity
Own IP, built-in web page, HTTP/HTTPS
PoE or 48 V adapter over a single network cable
SNMP output for PRTG, Zabbix and SolarWinds
Where it is used
Server rooms, data centres and UPS rooms
Under raised floors and along chiller pipework
Plant rooms and mechanical services areas
Warehouses, document archives and storage vaults
Production lines and water transfer routes
Protecting sensitive equipment from floor flooding
Installation
Lay the sensing cable on the floor at the lowest point of the protected area, along the path water would naturally take.
