FTD3070-01
Spot Temperature Sensor
The Spot Temperature Sensor from Fidar Electronics measures one specific point with a fast 10 kΩ NTC element. It connects to a FIDAQUIRE data logger over a daisy-chained CANopen bus.
10 kΩ NTC element, −50 to 250 °C
Fast response at the measuring point
Simple mounting on pipe, machine body or panel
RJ45 output on a CANopen bus
Daisy-chains up to 64 sensors per card
Works with the FBC0232-01 card and FIDAQUIRE logger
Up to 500 m of bus at 125 kbit/s
Power and data share one cable
A spot temperature sensor with a 10 kΩ NTC element reads one specific point quickly and cheaply. Where the goal is watching a machine or a critical spot — rather than certified reference measurement — this is the economical choice. It fits easily on a pipe, a motor body or inside a cabinet, which means you can afford several points instead of one; in thermal monitoring, coverage usually matters more than single-point accuracy.
Key features
10 kΩ NTC element, −50 to 250 °C
Fast response at the measuring point
Simple mounting on pipe, machine body or panel
RJ45 output on a CANopen bus
Daisy-chains up to 64 sensors per card
Works with the FBC0232-01 card and FIDAQUIRE logger
Up to 500 m of bus at 125 kbit/s
Power and data share one cable
Connectivity
RJ45 CANopen output running at 125 kbit/s
Daisy-chain of up to 64 sensors on one FBC0232-01 card
Automatic input-break detection reported to the logger
Where it is used
Server room, rack and network-equipment temperature
Cold stores, industrial refrigerators and warehouses
Motor, pump and rotating-equipment body temperature
Flow and return pipe temperature in a plant room
Greenhouse and livestock-house temperature
Inside electrical panels and equipment enclosures
Installation
Put the probe in direct contact with the target surface or air; an air gap or direct sunlight pulls the reading away from the real value.
