FTA3070-01
Temperature and Humidity Sensor
The Temperature and Humidity Sensor from Fidar Electronics reads ambient temperature and relative humidity from one point, each with its own alarm threshold. It connects to a FIDAQUIRE data logger over a daisy-chained CANopen bus.
Reads temperature and relative humidity together
−40 to 125 °C and 0–100 % RH measuring range
Independent alarm thresholds for each value
Built for continuous environmental monitoring
RJ45 output on a CANopen bus
Daisy-chains up to 64 sensors per card
Works with the FBC0232-01 card and FIDAQUIRE logger
Up to 500 m of bus at 125 kbit/s
Temperature and humidity only make sense together. In a server room dry air invites electrostatic discharge while damp air brings corrosion and condensation on boards; in storage the pair decides shelf life, and in a greenhouse it decides growth. This sensor reads both from a single point, so the two values are simultaneous and comparable, and each can carry its own threshold.
Key features
Reads temperature and relative humidity together
−40 to 125 °C and 0–100 % RH measuring range
Independent alarm thresholds for each value
Built for continuous environmental monitoring
RJ45 output on a CANopen bus
Daisy-chains up to 64 sensors per card
Works with the FBC0232-01 card and FIDAQUIRE logger
Up to 500 m of bus at 125 kbit/s
Connectivity
RJ45 CANopen output running at 125 kbit/s
Daisy-chain of up to 64 sensors on one FBC0232-01 card
Automatic input-break detection reported to the logger
Where it is used
Server room and data-centre environmental monitoring
Warehouse, cold-store and pharmaceutical storage
Greenhouses and mushroom or plant growing rooms
Livestock and poultry house climate control
Clean rooms, laboratories and operating theatres
Archive, records and museum conservation
Installation
Mount it in free-moving air, away from heat sources, sunlight and the direct discharge of an air handler.
| Dimensions | Height 3 cm, Depth 12 cm, Width 10.5 cm |
|---|---|
| Weight | 0.3 kg |
| Operating temperature | -10 to 45 °C |
| Storage temperature | -20 to 60 °C |
| Operating humidity | 0 to 60%, non-condensing |
| Warranty | 2 years |
| Mount | 2 Wall-mount holes |
| Input | -40 to 125 ℃ temperature, 0 to 100% humidity |
| Output | RJ45 CANopen bus |
Temperature and humidity only make sense together. In a server room dry air invites electrostatic discharge while damp air brings corrosion and condensation on boards; in storage the pair decides shelf life, and in a greenhouse it decides growth. This sensor reads both from a single point, so the two values are simultaneous and comparable, and each can carry its own threshold. This model reports over a CANopen bus. Sensors daisy-chain onto a single shielded twisted pair that lands on an FBC0232-01 CANopen card inside a FIDAQUIRE data logger, so adding a station costs a tap on the existing cable instead of a new home run. Typical applications: • Server room and data-centre environmental monitoring • Warehouse, cold-store and pharmaceutical storage • Greenhouses and mushroom or plant growing rooms • Livestock and poultry house climate control • Clean rooms, laboratories and operating theatres • Archive, records and museum conservation
FTA3070-01-Usermanual-EN
v1.0 · EN · 797 KB




