FTD3070-11
Wireless Spot Temperature Sensor
The Wireless Spot Temperature Sensor from Fidar Electronics measures one specific point with a fast 10 kΩ NTC element. It links over a LoRa radio with no cabling at all.
10 kΩ NTC element, −50 to 250 °C
Fast response at the measuring point
Simple mounting on pipe, machine body or panel
LoRa radio link up to 1 km line of sight
AES-128 encrypted payloads
Pairs with the FWL1600-01 LoRa card
No cabling; pairing takes seconds
Low-battery warning per node
A spot temperature sensor with a 10 kΩ NTC element reads one specific point quickly and cheaply. Where the goal is watching a machine or a critical spot — rather than certified reference measurement — this is the economical choice. It fits easily on a pipe, a motor body or inside a cabinet, which means you can afford several points instead of one; in thermal monitoring, coverage usually matters more than single-point accuracy.
Key features
10 kΩ NTC element, −50 to 250 °C
Fast response at the measuring point
Simple mounting on pipe, machine body or panel
LoRa radio link up to 1 km line of sight
AES-128 encrypted payloads
Pairs with the FWL1600-01 LoRa card
No cabling; pairing takes seconds
Low-battery warning per node
Connectivity
LoRa link up to 1 km with AES-128 encryption
Quick pairing with the FWL1600-01 receiver card
Sensor-fault and low-battery warnings before the cell dies
Where it is used
Server room, rack and network-equipment temperature
Cold stores, industrial refrigerators and warehouses
Motor, pump and rotating-equipment body temperature
Flow and return pipe temperature in a plant room
Greenhouse and livestock-house temperature
Inside electrical panels and equipment enclosures
Installation
Put the probe in direct contact with the target surface or air; an air gap or direct sunlight pulls the reading away from the real value.
| Dimensions | Height 3 cm, Depth 12 cm, Width 10.5 cm |
|---|---|
| Weight | 0.3 kg |
| Operating temperature | -10 to 45 °C |
| Storage temperature | -20 to 60 °C |
| Operating humidity | 0 to 60%, non-condensing |
| Warranty | 2 years |
| Mount | 2 Wall-mount holes |
| Input Type | NTC sensor (10k) |
| Measurement Temperature Range | -50 to 250 °C |
| Output | Radio signal |
FTD3070-01-Usermanual-EN
v1.0 · EN · 665 KB




