FAV0220-26
3-Channel Networked DC Voltage Detector
The 3-Channel Networked DC Voltage Detector from Fidar Electronics reports whether a DC circuit up to 60 V is energised and raises the alarm the moment it is not. It runs standalone on its own IP address with a built-in web page.
Detects DC voltage presence up to 60 V
Three independent input channels in one unit
Immediate supply-loss alert with a timestamp
Covers 12, 24 and 48 V industrial supplies
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
A DC voltage detector reports whether a DC circuit up to 60 V is energised. On −48 V telecom sites, 24 V control panels and battery systems a supply loss is usually silent: nobody notices until a service drops, and by then nobody knows when it went. This detector raises the alarm at the moment it happens and records exactly when.
Key features
Detects DC voltage presence up to 60 V
Three independent input channels in one unit
Immediate supply-loss alert with a timestamp
Covers 12, 24 and 48 V industrial supplies
Own IP address and built-in web page
Powered by PoE or a 48 V adapter
DHCP or a static IP address
SNMP monitoring in PRTG and SolarWinds
Connectivity
Own IP, built-in web page, HTTP/HTTPS
PoE or 48 V adapter over a single network cable
SNMP output for PRTG, Zabbix and SolarWinds
Where it is used
−48 V supply monitoring at telecom sites and BTS towers
Proving 24 V control panels are powered
Power-supply and battery-charger output monitoring
Supply-loss alerts for instrumentation and PLCs
DC circuits in solar installations
Supply loss on security and fire-alarm systems
Installation
Wire the input in parallel with the monitored circuit and observe polarity.
