FBC0232-01
FBC0232-01 CANopen Input Card
The Fidar Electronics FBC0232-01 CANopen input card reads up to 64 CANopen sensors in real time into a FIDAQUIRE data logger, with automatic end-of-line termination detection.
Up to 64 CANopen sensors on one card
Real-time logging into the FIDAQUIRE data logger
Automatic end-of-line termination detection
SDO transmission for remote sensor configuration
Automatic input-break detection
1.5 kV three-way galvanic isolation
Analogue and digital sensors share one bus
The FBC0232-01 is the bridge between Fidar's CANopen sensors and a FIDAQUIRE data logger. One card reads up to 64 sensors on a single daisy-chained bus — analogue or digital, all on one shielded twisted pair. It detects the end-of-line terminator automatically, reports any input break, and can send SDOs to the sensors for remote configuration.
Key features
- Up to 64 CANopen sensors on one card
- Real-time logging into the FIDAQUIRE data logger
- Automatic end-of-line termination detection
- SDO transmission for remote sensor configuration
- Automatic input-break detection
- 1.5 kV three-way galvanic isolation
- Analogue and digital sensors share one bus
Where it is used
- Connecting a CANopen sensor network to a FIDAQUIRE logger
- Central monitoring of dozens of points on one bus cable
- Industrial automation and production-line control
- Substations and energy infrastructure monitoring
- Server rooms, cold stores and controlled warehouses
Installation
Slot the card into the FIDAQUIRE chassis and land the CANopen bus on its RJ45 connector.
| Operating temperature | -10 to 45 °C |
|---|---|
| Storage temperature | -20 to 60 °C |
| Operating humidity | 0 to 60%, non-condensing |
| Warranty | 2 years |
| Mount | FIDAQUIRE card slot |
| Communication Method | CANopen |
| Number of sensor nodes | Up to 64 CANopen sensors |
| Input Types | CANopen sensors (analogue and digital) |
| Interface | RJ45 CANopen bus |
| Data Logging | Real-time to the FIDAQUIRE data logger |
| API Data Interchange Formats | CAN |
| Architecture | ARM 32-bit |
| Isolation | 1.5kv 3-way galvanically isolated |
| Power Supply | 0.1A 24V |
The FBC0232-01 is the bridge between Fidar's CANopen sensors and a FIDAQUIRE data logger. One card reads up to 64 sensors on a single daisy-chained bus — analogue or digital, all on one shielded twisted pair. It detects the end-of-line terminator automatically, reports any input break, and can send SDOs to the sensors for remote configuration. Typical applications: • Connecting a CANopen sensor network to a FIDAQUIRE logger • Central monitoring of dozens of points on one bus cable • Industrial automation and production-line control • Substations and energy infrastructure monitoring • Server rooms, cold stores and controlled warehouses
FBC0232-01-Usermanual-EN
v1.0 · EN · 727 KB




