FDM0800-01
FDM0800-01 Digital Input Card
The Fidar Electronics FDM0800-01 digital input card provides eight IEC61131-2 Type 1 and 3 input channels, configurable as dry contacts.
Eight independent digital input channels
IEC61131-2 Type 1 and 3 compliant
Inputs configurable as dry contacts
Per-channel enable with DIP switches
Real-time logging into the FIDAQUIRE logger
1.5 kV three-way galvanic isolation
The FDM0800-01 brings eight digital status lines into a FIDAQUIRE logger at once. The inputs follow IEC61131-2 Type 1 and 3 and can also be configured as dry contacts, so one card reads both live status lines and volt-free contacts — UPS alarm outputs, fire panels, door microswitches, contactor auxiliaries. Each channel can be enabled or disabled with a DIP switch, and logging is trigger-based.
Key features
Eight independent digital input channels
IEC61131-2 Type 1 and 3 compliant
Inputs configurable as dry contacts
Per-channel enable with DIP switches
Real-time logging into the FIDAQUIRE logger
1.5 kV three-way galvanic isolation
Where it is used
Reading UPS, generator and switchboard alarm outputs
Bringing fire and intruder panels into monitoring
Door status on racks, cabinets and equipment rooms
Limit and level switches on a production line
Contactor, relay and thermal-trip status in a panel
Installation
Slot the card into the FIDAQUIRE chassis and keep the input wiring clear of power cable so noise cannot fake a state change.
