FWL1600-01
FWL1600-01 LoRa Wireless Card (16 Nodes)
The Fidar Electronics FWL1600-01 LoRa card receives 16 wireless sensors in real time into a FIDAQUIRE data logger, with AES-128 encryption and per-channel battery warnings.
Links 16 wireless sensor nodes
Real-time logging into the FIDAQUIRE logger
AES-128 encrypted payloads
Simple, fast per-node pairing
Per-channel fault and low-battery warning
Logging interval from 1 s to 10 min via DIP switches
Firmware updated automatically from the mainboard
The FWL1600-01 is the FIDAQUIRE's wireless arm: it reads up to 16 LoRa sensors at once and logs them in real time. Every Fidar wireless sensor — temperature, humidity, current, voltage, water leak, shock — pairs with this card, so a site can bring its remote, uncabled points into monitoring with no cable work at all. The logging interval is DIP-selectable from one second to ten minutes.
Key features
Links 16 wireless sensor nodes
Real-time logging into the FIDAQUIRE logger
AES-128 encrypted payloads
Simple, fast per-node pairing
Per-channel fault and low-battery warning
Logging interval from 1 s to 10 min via DIP switches
Firmware updated automatically from the mainboard
Where it is used
Adding wireless sensors to a FIDAQUIRE logger
Remote points where cable cannot be run
Smart agriculture and greenhouse monitoring
Urban infrastructure and resource monitoring
Energy distribution networks and solar systems
Fast monitoring rollouts with no building work
Installation
Slot it into the FIDAQUIRE chassis and keep the antenna clear of the rack's metalwork to preserve range.
| Dimensions | Height 5.6cm, Depth 18.5cm, Width 10cm |
|---|---|
| Weight | 0.4 kg |
| Operating temperature | -10 to 45 °C |
| Storage temperature | -20 to 60 °C |
| Operating humidity | 0 to 60%, non-condensing |
| Warranty | 2 years |
| Communication Method | LoRa Wireless communication |
| Number of Inputs | 16 nodes |
| Features | Line Fault Detection, Easy Pairing Process, Low Battery Signal |
| Data Logging | 1s/5s/10s/30s/1m/2m/5m/10m intervals (can be configured using DIP switches) |
| Resolution | Based on sensor node |
| API Data Interchange Formats | CAN |
| Architecture | ARM 32-bit |
| CPU speed | 32MHz |
| Power Supply | 0.1A 24V |
The FWL1600-01 is the FIDAQUIRE's wireless arm: it reads up to 16 LoRa sensors at once and logs them in real time. Every Fidar wireless sensor — temperature, humidity, current, voltage, water leak, shock — pairs with this card, so a site can bring its remote, uncabled points into monitoring with no cable work at all. The logging interval is DIP-selectable from one second to ten minutes. Typical applications: • Adding wireless sensors to a FIDAQUIRE logger • Remote points where cable cannot be run • Smart agriculture and greenhouse monitoring • Urban infrastructure and resource monitoring • Energy distribution networks and solar systems • Fast monitoring rollouts with no building work
FWL1600-01-Usermanual-EN
v1.0 · EN · 814 KB




