Why networked sensors rather than wired ones?

Because in a server room the network already reaches the rack. A networked sensor sits on the same switch, so there is no separate CANopen bus to pull.

Where should leak detection go?

Under the raised floor, near the precision cooling unit, and along chilled water pipe runs. Each spot takes one leak sensor; this package is sized for two.

Does it work with SNMP?

The FCD6455-01 logger carries an SNMP v1 agent and can report status to your existing network monitoring system. Choose that variant if you need it.

Ready-made package

Server room monitoring package

Temperature, humidity and water leak detection for a server room, over the network you already have.

Packaged system — this exact combination is installed today

measurement points: 6
line items: 7
link: Networked

Quantities monitored: Temperature, Humidity, Water leak

How it connects

6 field devices

Ethernet

Central unitFCD6455-01

Platform SMSLoggingRemote access

What is in this package

Fidar's pick

6 devices

The central unit is the main data logger.

Central unit

1×FIDAQUIRE FCD6455-01 Industrial Data Logger
FCD6455-01
The datasheet states no device ceiling; this configuration carries 6.

Sensors

4×Networked Temperature and Humidity Sensor
FTA3070-21
4 Temperature and Humidity points; 1 channel(s) per device, so 4.
2×Networked Water Leak Sensor
FDW0050-21
2 Water leak points; 1 channel(s) per device, so 2.

Notes on this configuration

Temperature and Humidity share one probe — the sensors are not counted twice.
This unit also takes 5 I/O cards at 8 channels each; if you would rather wire straight into the chassis, an engineer can quote the card-based build.
This is a combination Fidar already installs as a packaged system.

Frequently asked questions

Why networked sensors rather than wired ones?: Because in a server room the network already reaches the rack. A networked sensor sits on the same switch, so there is no separate CANopen bus to pull.
Where should leak detection go?: Under the raised floor, near the precision cooling unit, and along chilled water pipe runs. Each spot takes one leak sensor; this package is sized for two.
Does it work with SNMP?: The FCD6455-01 logger carries an SNMP v1 agent and can report status to your existing network monitoring system. Choose that variant if you need it.

Need a different point count?

Open this configuration in the wizard and change the points, the link or the outputs.

Open in the wizard

Request a quotation

Send us this list and an engineer will check it against your installation and price it. These products are priced per project and prices are not published on the site.

Talk to an engineer