How many temperature points does a boiler room need?

Usually heating flow and return, domestic hot water flow and return, tank temperature and the plant room's own ambient. Those six are the basis of this package.

What does the system switch?

Circulation pumps, the hot water pump, the burner and solenoid valves are switched through relay outputs. The exact output count is settled against your plant room drawing.

Is the fuel saving measurable?

The logger records temperature and run hours, so there is a before-and-after baseline. How much is saved depends on the plant room's starting condition and cannot be guaranteed in advance.

Ready-made package

Smart powerhouse (boiler room) package

Flow and return temperature control, pump and burner switching over relays, and SMS alerts.

Packaged system — this exact combination is installed today

measurement points: 6
line items: 10
link: Wired CANopen

Quantities monitored: Temperature

How it connects

6 field devices

Wired CANopen

Central unitFCD6455-01

Local displayRelay controlPlatform SMS

What is in this package

Fidar's pick

6 devices

The central unit is the main data logger.

Central unit

1×FIDAQUIRE FCD6455-01 Industrial Data Logger
FCD6455-01
The datasheet states no device ceiling; this configuration carries 6.

Sensors

6×Temperature and Humidity Sensor
FTA3070-01
6 Temperature points; 1 channel(s) per device, so 6.

Control outputs

3×2-Channel Relay Module
FDR0102-01
5 outputs remain; 3 × 2-channel relay module.

Notes on this configuration

This unit also takes 5 I/O cards at 8 channels each; if you would rather wire straight into the chassis, an engineer can quote the card-based build.
1 of the 6 control outputs come off the unit's own relays.
This is a combination Fidar already installs as a packaged system.

Frequently asked questions

How many temperature points does a boiler room need?: Usually heating flow and return, domestic hot water flow and return, tank temperature and the plant room's own ambient. Those six are the basis of this package.
What does the system switch?: Circulation pumps, the hot water pump, the burner and solenoid valves are switched through relay outputs. The exact output count is settled against your plant room drawing.
Is the fuel saving measurable?: The logger records temperature and run hours, so there is a before-and-after baseline. How much is saved depends on the plant room's starting condition and cannot be guaranteed in advance.

Need a different point count?

Open this configuration in the wizard and change the points, the link or the outputs.

Open in the wizard

Request a quotation

Send us this list and an engineer will check it against your installation and price it. These products are priced per project and prices are not published on the site.

Talk to an engineer