Browse Fidar product categories
81 products
FAV0220-06
The 3-Channel DC Voltage Detector from Fidar Electronics reports whether a DC circuit up to 60 V is energised and raises the alarm the moment it is not. It connects to a FIDAQUIRE data logger over a daisy-chained CANopen bus.
View product
FAV0220-13
The Wireless AC Voltage Level Sensor from Fidar Electronics measures mains RMS voltage from 50 to 250 V and records every sag and surge. It links over a LoRa radio with no cabling at all.
View product
FAV0220-14
The Wireless DC Voltage Level Sensor from Fidar Electronics reads DC voltage from 0 to 24 V and records how it sags over time. It links over a LoRa radio with no cabling at all.
View product
FAV0220-15
The Wireless 3-Channel AC Voltage Detector from Fidar Electronics reports whether an AC line up to 220 V is live and timestamps every loss and restore. It links over a LoRa radio with no cabling at all.
View product
FAV0220-16
The Wireless 3-Channel DC Voltage Detector from Fidar Electronics reports whether a DC circuit up to 60 V is energised and raises the alarm the moment it is not. It links over a LoRa radio with no cabling at all.
View product
FAV0220-23
The 3-Channel Networked AC Voltage Level Sensor from Fidar Electronics measures mains RMS voltage from 50 to 250 V and records every sag and surge. It runs standalone on its own IP address with a built-in web page.
View product
FAV0220-24
The 3-Channel Networked DC Voltage Level Sensor from Fidar Electronics reads DC voltage from 0 to 24 V and records how it sags over time. It runs standalone on its own IP address with a built-in web page.
View product
FAV0220-25
The 3-Channel Networked AC Voltage Detector from Fidar Electronics reports whether an AC line up to 220 V is live and timestamps every loss and restore. It runs standalone on its own IP address with a built-in web page.
View product
FAV0220-26
The 3-Channel Networked DC Voltage Detector from Fidar Electronics reports whether a DC circuit up to 60 V is energised and raises the alarm the moment it is not. It runs standalone on its own IP address with a built-in web page.
View product
FBC0232-01
The Fidar Electronics FBC0232-01 CANopen input card reads up to 64 CANopen sensors in real time into a FIDAQUIRE data logger, with automatic end-of-line termination detection.
View product
FCD3245-01
The Fidar Electronics FCD3245-01 sends power-plant site temperature and humidity to the electricity market system, with four 4–20 mA outputs for the plant DCS.
View product
FCD6455-01
The FIDAQUIRE FCD6455-01 from Fidar Electronics is a modular industrial data logger with its own web server, analogue, digital, relay, wireless and CANopen cards, and Modbus and SNMP support.
View product
FCH3256-01
The Fidar Electronics FCH3256-01 smart powerhouse controller runs two boilers and two pumps, cuts energy use by 30–40 %, links to the cloud over Ethernet and reports faults by SMS.
View product
FCM3256-01
The Fidar Electronics FCM3256-01 smart powerhouse controller runs two boilers and two pumps and reaches the cloud over two mobile networks (dual SIM), with SMS fault alerts.
View product
FCM3256-02
The Fidar Electronics FCM3256-02 is the compact powerhouse controller: two boilers, two pumps, smart scheduling, an anti-freeze mode and a 30–40 % cut in consumption.
View product
FDD0001-01
The Dry Contact Detector from Fidar Electronics reads the open or closed state of volt-free equipment contacts and turns every change into an alertable event. It connects to a FIDAQUIRE data logger over a daisy-chained CANopen bus.
View product
FDD0001-02
The 3-Channel Dry Contact Detector from Fidar Electronics reads the open or closed state of volt-free equipment contacts and turns every change into an alertable event. It connects to a FIDAQUIRE data logger over a daisy-chained CANopen bus.
View product
FDD0001-11
The Wireless Dry Contact Detector from Fidar Electronics reads the open or closed state of volt-free equipment contacts and turns every change into an alertable event. It links over a LoRa radio with no cabling at all.
View product
FDD0001-12
The Wireless 3-Channel Dry Contact Detector from Fidar Electronics reads the open or closed state of volt-free equipment contacts and turns every change into an alertable event. It links over a LoRa radio with no cabling at all.
View product
FDD0001-22
The 3-Channel Networked Dry Contact Detector from Fidar Electronics reads the open or closed state of volt-free equipment contacts and turns every change into an alertable event. It runs standalone on its own IP address with a built-in web page.
View product
FDM0800-01
The Fidar Electronics FDM0800-01 digital input card provides eight IEC61131-2 Type 1 and 3 input channels, configurable as dry contacts.
View product
FDR0102-01
The 2-Channel Relay Module from Fidar Electronics provides two relay outputs, driven remotely or from a sensor threshold. It connects to a FIDAQUIRE data logger over a daisy-chained CANopen bus.
View product
FDR0102-11
The Wireless 2-Channel Relay Module from Fidar Electronics provides two relay outputs, driven remotely or from a sensor threshold. It links over a LoRa radio with no cabling at all.
View product
FDR0508-01
The Fidar Electronics FDR0508-01 relay output card switches eight electrical loads from a FIDAQUIRE data logger, for automatic and remote control.
View product
